Serial NO. : A013002-EN
Date of Editing : 2024-10-14
Problem Solving :
Application Introduction
Using SOYAL software 701ClientSQL, QR codes can be generated for reservation personnel. The reservation personnel can scan the QR code within the specified time frame to unlock the meeting room door lock. Simultaneously, via the WG Port Door Relay, an external power-saving device connected to environmental control equipment will be triggered to maintain continuous power until the QR code's validity period expires.
Solution 1 :
Architecture
Hardware and Software List
| Category | Product | Version | Quantity |
| Hardware | AR-725-E | APS725Ev2__V0405_241004 QRCo_MEETING_ROOM 會議室電源區段管控.STM | 1 |
| AR-888-UL | 888ULS_7V3 241009 QR_Code_HS BYPASS.ISP | 1 | |
| AR-321-L485-5V | N/A | 1 | |
| AR-821RB | N/A | 1 | |
| Software | 701ServerSQL | 701ServerSetup11v1 240927.exe | 1 |
| 701ClientSQL | 701ClientSetup11v1 241001 QRCodeDateTimeLimit會議室預約時段WGRelay電源管理.exe | 1 |
Solution 2 :
Architecture
Hardware and Software List
| Category | Product | Version | Quantity |
| Hardware | AR-837-EL | APS837E____V0405_241001 QRCo_MEETING_ROOM 會議室電源區段管控 勿開共用繼電器.STM | 1 |
| AR-821RB | N/A | 1 | |
| Software | 701ServerSQL | 701ServerSetup11v1 240927.exe | 1 |
| 701ClientSQL | 701ClientSetup11v1 241001 QRCodeDateTimeLimit會議室預約時段WGRelay電源管理.exe | 1 |
Configuration/Operation Process:
1. Modify the 725-E mode and communication settings using 701Server. Ensure the following parameters:
a. Door Unlock Time: Set the duration for the meeting room door lock as needed (default is 7 seconds). The delay for [WG] seconds must be set to 0 to allow the external environmental control device to maintain a normally open/closed state.
b. [Shared Relay]: Ensure this setting is disabled.
The steps are as follows:
2. Use 701Client to register users:
User information includes card number, start and end date/time, and QR Code generation for use by the reserved personnel. The user data is then downloaded to the AR-837-EL or AR-725-E to create a whitelist. The reserved personnel scans the QR Code using AR-837-EL or 888-UL, which transmits the data to AR-725-
Example:
In this case, the specified time frame is:
- Start: 10:00 on 2024/09/01
- End: 13:21 on 2024/10/14
The steps are as follows:
