SOYAL TECHNOLOGY CO., LTD

Membership Center
0
Browsing Records
How to set auto open time zone?
2021-01-06
No. S00307001-EN

Serial NO.: S00307001-EN

Date of Editing: 2008-10-30

Answer:

(Only available on AR-716E & AR-829E)
1. Run the 701Server and make sure 721H/727H has connected to 716E first.
2. AR-721H/727H only supports two sets of auto open time zone but it can be extended up to 63 sets if connected to the controller AR-716E. Go to 716 parameter on the tool bar and click "Enable Auto Open (Zone: 63)" as pictured.

3. If you would like to have 10 sets of different time zone a day --- for instance door open during 09:00 a.m. - 09:15 a.m., 12:00 p.m. - 13:00 p.m., 15:00 p.m. - 15:15 p.m., etc. You set start time on 63rd zone link it to next time zone and since I set next time period on zone 1 so it has to link to zone 1. Click save and send to controller.
 
Keep repeating it till all the period of time is set up as you desire and please note that End time must be greater than Start time.

4. Give command to AR-721H via keypad.
Command 20*020# after entering Program Mode and press **# to save the setting and exit.

5. Give command to AR-727H via keypad.
Quick command 3. Parameters(1), 2. AutoOpen Zone, and press 1. Yes

Browsing Records
Go Top