SOYAL TECHNOLOGY CO., LTD

Serial NO : S00901001-EN

Date of Editing :  2011-09-23

Questions : How to add and delete single card by CommView?

Problem Solving :

To add single card into controller, the card information and parameter as below:

Card number: 40323 22676

User address: 00001

Pin Code: None

Access mode: Card only

Zone: None

Please follow the steps as below:

1. To change card number from decimal to hex. 40323 = 9D83, 22676 = 5894
2. Please execute CommView > select COM port. > Select Node ID of controller
3. Chose the transfer speed: 9600, None
4. Input the command. For example, to add single card which the user address is 00001. The command is 8300019D83589400000100

Delete single card:

Please input command 83 add user address and input 0 for site code and card code..

1. Please execute CommView > select COM port. > Select Node Id of controller
2. Chose the transfer speed: 9600, None
3. Input the command. For example, we want to delete the single card which the user address is 00001 The command will be
4. Click ”Send”