How to change LAN card to NEW card?

Serial NO :S00401002-EN

Date of Editing : 2014-09-05

Questions : How to change LAN card to NEW card?

Problem Solving :

1. Set up two sets default key A& B in SIM, CIM, UIM’s Block 20 and Block 21.  Choose“Store in SIM/CIM/UIM Data Block”
2. Enter Default Key A & B are FFFFFFFFFFFF/ FFFFFFFFFFFF.

          Select Config [Trailer] A:Decrement B:Increment; Dest. 20

          Select Config [Trailer] Default (FF078069); Dest. 21

3. Click Execute

4. Choose“From SIM/CIM/UIM>> Device Key

          Select KeyA to 00; KeyB to 01.

          Select 16for Source Block

          Click Execute

5. Choose“From SIM/CIM/UIM>> TMP Buffer

          Select Source Block 20, Device TMP Buffer 0, Click Execute

          Select Source Block 21, Device TMP Buffer 1, Click Execute

1. Click Format Medium, set up the status as picture below. Then Click “Run”to restore the card to NEW card.

           Note:

           -If the block was written previously, please select 01 (Key B) in “Use Key at” column.

           -If the Status shows Sector00 (OK), it means the block restores. If the Status shows Sector00 (ERR), it means the block fails to reset.