Serial NO. : H01408001-EN
Date of Editing : 2011-07-21
Questions : I already set different node id for two 829E. When I access from different door, it still show the record from same door. Why?
Problem Solving :
The reason to cause this situation might because you forget to set different Door number, that’s why you access from different door but show the record from the same door. Please follow the setting step as below then you can solve this problem.
There are two doors control by two 829E. Please set door name and door number for two doors first.
1. Please execute 701Client and click > click “Add Door” > Input “door number of reader” and “door name” > click “ok”
2. Please set node id for two 829E. Then set parameter for 829E on 701Server. Execute 701Server and then click > Input Read From “001” and Door Num “1” and parameter you want to set > click “Write To Controller”
3. In put Read from “002” > click “Read From Controller” > Input Door Num “2” > click “Write To Controller”
To sum up, when you set different door number for different node id as below, the problem will be solved.
Set 829E at front door > node id “001” > Door num “1”
Set 829E at back door > node id “002” > Door num “2”