SOYAL TECHNOLOGY CO., LTD

Membership Center
0
Browsing Records
How to handle the reconnect dialog box when SOYAL 701ClientSQL cannot be opened or connected to 701ServerSQL?
2022-06-14
No. S00302004-EN

Serial NO.: S00302004-EN

Date of Editing: 2022-06-14

Questions : How to respond the dialogue of “Connect to 701Server” when executing 701ClientSQL? 
                     How to setup the IP Address and Port of the 701ServerSQL & 701ClientSQL?

Solution :

701ServerSQL and 701ClientSQL had been updated as TCP communication mode after version 10, the connection dialogue will popup while 701ServerSQL hadn’t been executed first or the IP Address of 701ServerSQL and 701ClientSQL are not synchronized.

Demonstration:

*If the 701ClientSQL quit unexpectedly after executing, please exclude 701ServerSQL and 701ClientSQL folders in firewall or defender, details please refer to the relevant FAQ- How to deal with 701ServerSQL and 701ClientSQL quit unexpectedly?

Solution1. Execute 701ServerSQL before 701ClientSQL 

If required to modify the IP Address and Port of 701ClientSQL, the dialogue above will popup when 701ServerSQL not executed first. The parameters can also be modified through Regedit program while the dialogue didn’t show up, the steps please refer to Solution 2.

Solution2. Confirm the IP Address and Port are synchronized in 701ServerSQL and 701ClientSQL 

Step1. Select COM in 701ServerSQL, input local TCP-LINK Address and Port, press save and yes after setting.

*The default value of TCP-LINK Address IP is 127.0.0.1, it is work for single PC only (701ServerSQL and 701ClientSQL are installed in same PC). It is required to input local IP when using multiple PCs.

Step2. Login “Regedit”, and confrm the 701ServerSQL and 701ClientSQL IP parmeter are identical, right click to modify when the value different.

Step3. Restart the 701ServerSQL, and 701ClientSQL will be available to execute

 

* Turn off the window of “Connect to 701Server” or press cancel will also hint the user that 701ServerSQL Port and IP can be modified via Regedit.

*Please remind that the default value of TCP-LINK Port is 1631, if the solutions above cannot connect as before, setting TCP-LINK Port as 6631 will be helpful.

Browsing Records
Go Top