Enterprise (E) Series Controllers: Roll Shutter Door, Anti-Tamper, and Various Alarm Applications and Wiring Compilation

2024-05-30

No. A001037-EN

Serial NO. : A001037-EN

Date of Editing : 2024-05-30

Index :

1. Introduction to the Application of Enterprise Edition (E) Series Controllers with Roller Shutter Doors

2.Tamper-Switch Alarm Wiring Method(Simplified Peace of Mind Type-WG Port Sensor Wiring Method)

3. Tamper-Switch Alarm Wiring Method(Centralized Monitoring Type with Assurance(RS485)-Connect to CentralMonitoring System through Modbus via Universal I/O Module)

4.Tamper-Switch Alarm Wiring Method(Cloud Monitoring Active Reporting Type-TCP)

1. Introduction to the Application of Enterprise Edition (E) Series Controllers with Roller Shutter Doors

Note: Requires special firmware, firmware name: APS837E____V0405_XXXXXX F1F3UPDOWN 有效通行後35秒內可控制動作時間ArmPulse.STM

Action Process :

After swiping a valid card, you can press F1/F2/F3 within 35 seconds to control the roll-up door up/stop/down. The output time for F1/F2/F3 is the same, with the "alert pulse output time" determining the actual output duration in seconds.

Operation Video :

2.Tamper-Switch Alarm Wiring Method(Simplified Peace of Mind Type-WG Port Sensor Wiring Method)

3. Tamper-Switch Alarm Wiring Method(Centralized Monitoring Type with Assurance(RS485)-Connect to CentralMonitoring System through Modbus via Universal I/O Module)

4.Tamper-Switch Alarm Wiring Method(Cloud Monitoring Active Reporting Type-TCP)

PREVHow to set the E Series Reader to Wiegand Mode? Using fingerprint & facial recognition reader as example.