SOYAL TECHNOLOGY CO., LTD

Serial NO. : I004004-EN

Date of Editing : 

Questions :  How to set up the controller on barrier gate application?

Problem Solving :

A:：

1. Open door: Door relay connect to the gate open point. The door relay time

depends on the gate open time. There should be enough time till the gate is opened through.

2. Close door :  Close the barrier gate by triggering alarm relay.

1. 1. Connect alarm output to one relay and connect this relay to

close trigger of barrier gate.

1. 2. The controller connect to door contactor, which is used for door

sensor and alarm output.

• 3. The controller parameter:
• Set up alarm relay output time to 0 second.
• Enable force open alarm.
• Disable alarm when door close.
• Enable alarm~ when door open overtime, start door close alarm.